Carbide Threaded Countersink – 5/8″

SKU: UCT 060625/UCT 130241

$109.15 ex. GST

Australian Made.
Designed to countersink/chamfer holes at either 100 or 130° included angle with a controlled radius between the hole and the chamfer. This allows for an excellent seal between the rivet and the part, this is due to the rivet not fowling on a sharp edge and therefore seating along the full surface (angle and radius), rather than just on the angle itself.
Excellent for cutting hard or abrasive products.
Also has a 3mm through hole for tightening the tool into/out of a fixture.

These countersinks can be resharpened in house by Ultracut, therefore saving on new tooling costs.

These countersinks can be custom made to your required sizing. Please email sales@ultracut.com.au for inquiry’s.

SKU: UCT 060625/UCT 130241 Categories: ,

Description

Australian Made.
Designed to countersink/chamfer holes at either 100 or 130° included angle with a controlled radius between the hole and the chamfer. This allows for an excellent seal between the rivet and the part, this is due to the rivet not fowling on a sharp edge and therefore seating along the full surface (angle and radius), rather than just on the angle itself.
Excellent for cutting hard or abrasive products.
Also has a 3mm through hole for tightening the tool into/out of a fixture.

These countersinks can be resharpened in house by Ultracut, therefore saving on new tooling costs.

These countersinks can be custom made to your required sizing. Please email sales@ultracut.com.au for inquiry’s.

Additional information

Countersink Angle

100°, 130°

Countersink Pilot Ø

.0980'' (2.489mm), .1250'' (3.175mm), .1285" (3.264mm), .1562'' (3.967mm), .1590" (4.039mm), .1875'' (4.763mm), .1935'' (4.915mm), .1990" (5.050mm), .2500'' (6.350mm)

Related products