Platinum box

SKU: NG9500 Category:

Description

Collected to meet the total requirements of tool and die makers and for deburring specialists.
Contains Hex Key (1.5mm).
Pack dimensions: 270 x 230 x 50mm.

Includes the following items:
Nogogrip3 handle – holds all blades holders. Spare blades are kept inside back cap. Designed for maximum comfort in your hand.
N holder – holds 2.6mm blades, telescopes from 25-115mm. Length: 131mm
N1 blade – works best on steel aluminium and plastic, made of HSS (62-64 HRC), incl. angle of 40 degrees, for right hand users.
N2 blade – works best on brass and cast iron, made of HSS (62-64 HRC), incl. angle of 80 degrees, for left and right hand users.
Nogagrip1 handle – holds all S blades (3.2mm). Spare blades are kept inside back cap. Designed for maximum comfort in your hand.
S holder – Holds S blades (3.2mm), telescopes from 30-115mm. Length: 131mm.
S10 blade – works best on steel, aluminium and plastic, made of HSS (62-64 HRC), incl. angle of 40 degrees, for right hand users.
S20 blade – works best on brass and cast iron, made of HSS (62-64 HRC), incl. angle of 60 degrees, for left and right hand users.
S30 blade – works best on both int. and ext. burrs, made of HSS (62-64 HRC), incl. angle of 40 degrees, for right hand users.
S150 blade – works best on holes as small as 1.5mm diameter, made of HSS (62-64 HRC), incl. angle of 45 degrees, for right hand users.
RD10.4 – 10.4mm cranked rotodrive countersink, range of 1-10.4mm, countersinking angle of 90 degrees, made of HSS (62-64 HRC)
EX18 countersink – 18mm external cranked rotodrive countersink, range 4-18mm, countersinking angle of 90 degrees, made of HSS (62-64 HRC).
D Holder – designed to hold D50 and D66 scrapers, 3mm setscrew for holding the blade, length 131mm.
D50 scraper – blade dimensions 2.5mm x 50mm. (Width/Length), incl. angle of 60 degrees, made of HSS (62-64 HRC)
D66 scraper – blade dimensions 2.7x50mm, incl. angle of 50 degrees, made of HSS (62-64 HRC)
C Holder – holds C12, C20 and C30 countersinks, M7 external thread, length: 131mm.
C20 Countersink – range 3-20mm, countersinking angle of 90 degrees, made of HSS (62-64HRC)
Double burr handle – with safety guard to protect your hand.
N80 blade – working dimensions 0-12mm, incl. angle of 55 degrees, made of HSS (62-64 HRC)
K Holder – holds all K blades with M3 screw. Length: 135mm
N80K blade – working dimensions 2.4-11mm, incl. angle of 55 degrees, made of HSS (62-64 HRC)
Teddy burr handle – Pull sleeve down to easily replace the blade. Accepts all light duty N series, 2.6mm diameter swivel blades.